Mercury 45 Jet 50-55 - Cleaning and Inspection of Trim Rod Components

5B-28 - MID-SECTION 90-817643R1 DECEMBER 1996
2. Slowly remove manifold from cylinder. Note posi-
tion of above trim check ball assembly and re-
move.
54744
54743
a
a
a - Above Trim Check Ball Components
3. Remove O-rings from cylinder.
4. Remove filter.
54745
a
b
a - O-rings
b - Filter
Cleaning and Inspection of
Trim Rod Components
IMPORTANT: Components must be dirt and lint
free. Slightest amount of debris in Power Trim
system could cause system to malfunction.
CAUTION
Do not remove check valve components from
trim rod piston. Removal and reinstallation of
check valve could result in improper operating
pressure and possible power trim system dam-
age.
51199
a
a - Check Ball Components