90-817643R1 DECEMBER 1996 MID-SECTION - 5B-31
2. Install check ball components (a) into manifold.
54744
a
3. Hold check ball components in place using
screwdriver (as shown). Connect manifold to trim
cylinder.
54748
4. Secure manifold to cylinder using screws, torque
to 100 lb. in. (11.2 N·m).
54746
b
c
a
a - Trim Cylinder
b - Manifold
c - Screw
Oil Pump Installation
1. Secure power trim unit in soft jawed vise.
2. Install lubricated O-rings to manifold.
3. Install oil pump to manifold and secure using
screw, torque to 90 lb. in. (10.2 N·m).
54747
b
c
a
a - O-ring
b - Oil Pump
c - Screw
To Next Page
Loading...
