Mercury 45 Jet 50-55 - Valve Block Installation; Shock Rod Reassembly

5F-30 - MID-SECTION 90-817643R1 DECEMBER 1996
Valve Block Installation
1. Install lubricated O-rings.
51148
a
a - O-rings (2)
2. Install valve block to shock rod cylinder. Torque
screws to 100 lb. in. (11.5 N·m).
51146
a
b
c
a - Screw (2)
b - Valve Block
c - Shock Rod Cylinder
3. Install lubricated O-ring.
51145
Shock Rod Reassembly
1. Install lubricated O-rings.
2. Install rod wiper.
51145
b
c
a
a - Rod Wiper
b - Inner O-ring
c - Outer O-ring