Mercury 45 Jet 50-55 - Check Retainer Reassembly; Valve Plug Reassembly; Valve Block Installation

5G-28 - MID-SECTION 90-817643R1 DECEMBER 1996
CHECK RETAINER REASSEMBLY
1. Install plunger, spring (large), ball, spring (small),
and plug into valve block.
51142
a
b
c
d
e
a - Plunger
b - Spring (Large)
c - Ball
d - Spring (Small)
e - Plug
VALVE PLUG REASSEMBLY
1. Install plunger, steel ball, spring, lubricated O-ring
and screw plug. Torque screw plugs to 75 lb. in.
(8.5 N⋅m).
51142
e
d
c
b
a
a - Plungers (2)
b - Steel Balls (2)
c - Springs (2)
d - O-rings (2)
e - Screw Plugs (2) Torque to 75 lb. in. (8.5 N⋅m)
Valve Block Installation
1. Install lubricated O-rings and dowel pins.
51148
1
a
b
a - O-rings (2)
b - Dowel Pins (2)
2. Install valve block to shock rod cylinder. Insert
screws to shock rod cylinder and torque to 100 lb.
in. (11 N·m).
51146
a
c
b
a - Valve Block
b - Screws (2) Torque to 100 lb. in. (11 N⋅m)
c - Shock Rod Cylinder