Mercury 45 Jet 50-55 - Tiller Handle Disassembly

OUTBOARD INSTALLATION/ATTACHMENTS - 7B-1190-817643R1 DECEMBER 1996
10. Remove tiller handle, 2 nylon bushings, stainless steel
spacer and 2 flat washers from bracket.
51606
b
c
d
e
a
b
d
a - Tiller Handle
b - Nylon bushing (2)
c - Stainless Steel Spacer
d - Washer (2)
e - Bolt
11. Bend tab washer away form bolt securing shift lever
and remove bolt and lever from bracket.
51606
b
c
d
a
a - Tab Washer
b - Bolt
c - Shift Lever
d - Bracket
Tiller Handle Disassembly
1. Using a flat tip screwdriver, carefully pry/push rubber
grip off tiller handle.
51603
b
a
a - Grip
b - Tiller Handle
2. Remove screw from twist grip.
51603
a
a - Screw