Mercury 45 Jet 50-55 - Models with Two Hole Two Piece Steering Arm;Bracket and One Piece Top Cowl

51011
a
b
c
g
d
e
e
f
g
h
h
i
i
i
g
J
J
k
k
l
m
m
n
o
p
J
g
h
i
i
n
m
mo
l
g
k
h
i
i
J
J
g
i
i
h
k
p
f
e
d
g
i
h
J
e
OUTBOARD INSTALLATION/ATTACHMENTS - 7A-1190-817643R1 DECEMBER 1996
MODELS WITH TWO HOLE TWO PIECE STEERING
ARM/BRACKET AND ONE PIECE TOP COWL
Steering Cable Routed on Starboard Side of Boat Con-
nected to Port Outboard
a - Steering Link Connecting Hole
b - Coupler Assembly Connecting Hole
c - Steering Arm
d - Steering Link
e - Washer
f - Ride-Guide Cable
g - Steering Bracket
h - Special (Washer Head) Bolt (3/8” x 1-5/8”; P/N 10-90041),
Torque to 20 lb. ft. (27 N·m)
i - Special Washer (P/N 12-71970)
IMPORTANT: Lubricate all moving parts with Quicksil-
ver 2-4-C w/Teflon Marine Lubricant.
IMPORTANT: All 50-60 models with one piece top cowl
require a minimum centerline distance of 21 in.
(533mm) during dual outboard installation to assure
interference-free movement.
Steering Cable Routed on Port Side of Boat Connected
to Starboard Outboard
j - Lock Nut P/N 11-34863, Torque to 20 lb. ft. (27 N·m)
k - Steering Eye
l - Rubber Sleeve
m - Rubber Bushing
n - Jam Nut, Torque to 20 lb. ft. (27.1 N·m)
o - Dual Steering Coupler
p - Lock Nut P/N 11-34863, Torque Until it Seats [Do Not Exceed 120
lb. in. (13.5 N·m) of Torque], Then Back Off 1/4 Turn