Mercury 45 Jet 50-55 - Trim Motor Removal; Trim Motor Disassembly

90-817643R1 DECEMBER 1996 MID-SECTION - 5B-25
Trim “Motor” Removal
1. Secure power trim assembly in soft jawed vise.
2. Remove cap, washer and grommet from reser-
voir assembly.
51195
a
b
c
a - Cap
b - Washer
c - Grommet
3. Remove screws securing reservoir cap to reser-
voir.
51193
a
a
a - Screws
4. Remove motor and harness from reservoir.
51196
Trim “Motor” Disassembly
1. Remove end cap from motor housing. Note posi-
tion of washers on armature.
51194
a
b
c
d
a - End Cap
b - Motor Housing
c - Wave Washer (2)
d - Washer