90-817643R1 DECEMBER 1996 MID-SECTION - 5B-23
4. Remove trim rod assembly from cylinder.
51196
5. Remove memory piston from cylinder using lock-
ring pliers (shown) or suitable tool.
51193
6. Remove O-ring from memory piston.
51196
a
b
a - O-ring
b - Memory Piston
7. Remove trim system from vise and empty fluid
into appropriate container.
Trim Rod Disassembly
1. Place trim rod assembly on clean work surface.
2. Remove screws securing plate to trim rod piston
and O-ring.
3. Remove check ball components from trim rod pis-
ton.
51143
b
c
a
a - Screw
b - Plate
c - O-ring
CAUTION
When removing Trim Rod piston, spanner
wrench must have 1/4 in. x 5/16 in. long pegs to
avoid damage to trim piston.
To Next Page
Loading...
