Mercury 45 Jet 50-55 - Trim Motor Removal; Trim Motor Disassembly; Reservoir Assembly Removal

5D-18 - MID-SECTION 90-817643R1 DECEMBER 1996
Trim “Motor” Removal
1. Secure power trim assembly in soft jawed vise.
2. Remove screws securing end cap to reservoir
and remove end cap.
51486
a
a
a - Screws (4)
3. Remove motor from reservoir.
51484
Trim “Motor” Disassembly
1. Remove armature from motor frame. Note posi-
tion of washers on armature.
51486
a
b
c
c
a - Armature
b - Motor Frame
c - Washer (1 each end of armature)
Reservoir Assembly Removal
1. Remove manual release valve from manifold.
a
b
a - Manual Release Valve
b - Manifold
2. Remove “E” clip and O-rings from manual release
valve.
51196
a
b
c
a - “E” Clip
b - O-rings
c - Manual Release Valve