5F-24 - MID-SECTION 90-817643R1 DECEMBER 1996
3. Remove memory piston from cylinder using lock
ring pliers (Craftsman P/N 4735) or suitable tool.
51144
4. Remove O-ring from memory piston.
51144
b
a
a - O-ring
b - Memory Piston
5. Remove tilt system from vise and empty fluid into
appropriate container.
Shock Rod Disassembly
1. Place shock rod assembly on clean work surface.
2. Remove plate and O-ring.
3. Remove check ball components from shock rod
piston.
51143
b
c
d
a
a - Screw (3)
b - Plate
c - O-ring
d - Shock Rod Piston
CAUTION
When removing shock piston, spanner wrench
must have 1/4 in. x 5/16 in. long pegs to avoid
damage to shock piston.
To Next Page
Loading...
