MID-SECTION - 5E-4190-817643R1 DECEMBER 1996
3. Install the two (2) long screws and torque to 100
lb. in. (11 N⋅m).
51146
a
a - Screws (2) Torque to 100 lb. in. (11 N⋅m)
Oil Pump Installation
1. Install spring, ball, lubricated O-ring and plastic
seat to manifold.
2. Check to see that O-rings are placed on bottom
of pump.
3. Install filter and filter seal under pump. Install
pump onto manifold. Torque screws to 70 lb. in.
(7.7 N⋅m).
a
b
a - Screws (3) Torque to 70 lb. in. (7.7 N⋅m)
b - Suction Seat Assembly
To Next Page
Loading...
