MID-SECTION - 5C-3190-817643R1 DECEMBER 1996
2. Install O-rings on cylinder and secure manifold
assembly to cylinder using screws. Torque
screws to 100 lb. in. (11.3 N·m).
51008
a
51007
b
a - O-ring
b - Screws [100 lb. in. (11.3 N·m)]
3. Secure power trim unit in soft jawed vise.
4. Install check valve components and O-rings to
manifold. Secure oil pump to manifold using bolt.
Torque bolt to 90 lb. in. (10.2 N·m).
51007
51006
a
a
b
c
e
a
d
a - O-rings (3)
b - Oil Pump
c - Screw
d - Spring
e - Check Ball
Trim Motor Reassembly
1. Apply Quicksilver Marine Lubricant (2-4-C) to ar-
mature shaft and insert into end frame.
51195
a
b
c
a - Armature Shaft
b - Washer
c - End Frame
To Next Page
Loading...
