Mercury 45 Jet 50-55 - Power Trim Disassembly

5E-28 - MID SECTION 90-817643R1 DECEMBER 1996
6. Use suitable punch to remove (Drive Up) lower
pin. Retain dowel pin.
51144
a
a - Dowel Pin
7. Use suitable punch to drive out lower pivot pin.
51144
a
a - Lower Pivot Pin
Power Trim Disassembly
IMPORTANT: Power trim system is pressurized.
Trim rod must be in the full “UP” position (fully ex-
tended) prior to fill/drain plug, or manual release
valve removal.
1. Remove reservoir cap.
2. Remove manual release valve assembly to drain
oil.
55263
a
b
a - Reservoir Cap
b - Manual Release Valve