5E-44 - MID SECTION 90-817643R1 DECEMBER 1996
4. Apply 2-4-C Marine Lubricant ( 92-90018A12) to
lower pivot pin. Using a suitable punch, drive low-
er pivot pin into clamp bracket and trim cylinder
assembly until pivot pin is flush with outside sur-
face.
51147
a
a - Lower Pivot Pin
5. Using a suitable punch, drive lower dowel pin into
its hole until seated.
51148
a
a - Lower Dowel Pin
6. Apply 2-4-C Marine Lubricant (92-90018A12) to
surface of upper pivot pin, pivot pin bore and trim
ram bore.
51148
a
c
b
a - Pivot Pin
b - Pivot Pin Bore
c - Trim Ram Bore
7. Using a suitable mallet, drive upper pivot pin into
swivel bracket and through trim ram until pivot pin
is flush with swivel bracket.
51148
a
b
c
a - Pivot Pin
b - Swivel Bracket
c - Trim Ram
To Next Page
Loading...
