7B-22 - OUTBOARD INSTALLATION/ATTACHMENTS 90-817643R1 DECEMBER 1996
6. Holding components in place (lever facing forward), in-
stall lock nut and torque to 75 lb. in. (8 N·m). Secure
knob to lever with bolt.
51095
b
c
a
a - Locknut [75 lb. in. (8 N·m)]
b - Knob
c - Bolt [45 lb. in. (5 N·m)]
Tiller Handle Installation
1. Apply Loctite No. 35 (P/N 92-59328-1) to threads
(steering arm end) of tiller handle studs. Install with
stud installer. Tighten securely.
51092
b
a
a - Studs
b - Steering Arm
2. Install tiller handle to studs with shift rod positioned thru
cowl opening as shown.
54256
d
e
f
g
a
b
c
b
d
e
f
g
Design 1
Design 2
b
a - Tiller Handle
b - Shift Rod
c - Cowl
d - Bushing
e - Shift Handle
f - Washer
g - Cotter Key
3. Secure tiller handle assembly in place.
51091
a
b
b
c
a - Tiller Handle Assembly
b - Tab Washer (bend tabs against flats of locknuts)
c - Locknuts [Torque to 26 lb. ft. (35 N·m)]
To Next Page
Loading...
