Microhard Systems IPN3G - Page 142

© Microhard Systems Inc. 142
5.0 AT Commands
AT+MEMAC
Command Syntax
Retrieve the MAC Address of the local Ethernet
interface.
AT+MEMAC <enter>
Description
Example
Input:
AT+MEMAC<enter>
Response:
+MEMAC: "00:0F:92:00:40:9A"
OK
AT+MUMAC
Command Syntax
Query the MAC Address of the local USB
Ethernet interface.
AT+MUMAC <enter>
Description
Example
Input:
AT+MUMAC<enter>
Response:
+MUMAC: "00:0F:92:01:40:9A"
OK
AT+MUDPM
Command Syntax
Set the operating mode of the USB port.
AT+MUDPM=<mode>
0 - Console Mode
1 - Data Mode
2 - NDIS Mode
Description
Example
Input:
AT+MUDPM=2 <enter>
Response:
OK
The AT&W command
must be issued to save
changes!