Microhard Systems IPN3G - Page 143

© Microhard Systems Inc. 143
5.0 AT Commands
AT+MUNDIS
Command Syntax
Configuration of the USB that is set to NDIS
mode.
AT+MUNDIS=<mode>, <IP Address>,
<Netmask>, <Host IP>
Mode:
0 - Bridge
1 - Standalone
Description
Example
Input:
AT+MUNDIS=1,192.168.111.1,255.255.255.0,192.168.111.2 <enter>
Response:
OK
AT+MUDPS
Command Syntax
Enable/Disable USB Data port.
AT+MUDPS=<mode>
0 - Disable
1 - Enable
Description
Example
Input:
AT+MUDPS=0<enter>
Response:
OK
AT+MUDBR
Command Syntax
Set USB data port baud rate.
AT+MUDBR=<Baud Rate>
0 - 300
1 - 600
2 - 1200
3 - 2400
4 - 3600
5 - 4800
6 - 7200
7 - 9600
8 - 14400
9 - 19200
10 - 28800
11 - 38400
12 - 57600
13 - 115200
Description
Example
Input:
AT+MUDBR=13 <enter>
Response:
OK
The AT&W command
must be issued to save
changes!