Microhard Systems IPN3G - Page 145

© Microhard Systems Inc. 145
5.0 AT Commands
AT+MUDMPS
Command Syntax
Set the USB data port maximum packet size
(bytes).
AT+MUDMPS=<size>
Description
Example
Input:
AT+MUDMPS=1024 <enter>
Response:
OK
AT+MUDPL
Command Syntax
Set the USB data port priority.
AT+MUDPL=<mode>
0 - Normal
1 - Medium
2 - High
Description
Example
Input:
AT+MUDPL=0<enter>
Response:
OK
AT+MUDNCDI
Command Syntax
Enable/Disable USB data port no-connection
data intake.
AT+MUDNCDI=<mode>
0 - Disable
1 - Enable
Description
Example
Input:
AT+MUDNCDI=1 <enter>
Response:
OK
The AT&W command
must be issued to save
changes!