Microhard Systems IPN3G - Page 15

© Microhard Systems Inc. 15
2.0 Quick Start
 Connect A PC configured for DHCP directly to the ETHERNET port of the IPn3G,
using an Ethernet Cable. If the PC is configured for DHCP it will acquire a IP Ad-
dress from the IPn3G.
 Open a Browser Window and enter the IP address 192.168.0.1 into the address
bar.
 The IPn3G will then ask for a Username and Password. Enter the factory de-
faults listed below.
192.168.0.1
The factory default
network settings:
IP: 192.168.0.1
Subnet: 255.255.255.0
Gateway: 192.168.0.1
The Factory default login:
User name: admin
Password: admin
The factory default login:
User name: admin
Subnet: admin
It is always a good idea to
change the default admin
login for future security.