Microhard Systems IPN3G - Page 154

© Microhard Systems Inc. 154
5.0 AT Commands
AT+MPDN
Command Syntax
Sets the PPP dial number. Carrier dependant,
the default number is *99***1#
AT+MPDN=<Value>
Description
Example
Input:
AT+MPDN=*99***1#<enter>
Response:
OK
AT+MPCS
Command Syntax
Sets the modems connect string if required by
the carrier.
AT+MPCS=<connect string>
Description
Example
Input:
AT+MPCS=CONNECT <enter>
Response:
OK
AT+MAPN
Command Syntax
Sets the Access Point Name (APN). Required
and assigned by the wireless carrier.
AT+MAPN=<access point name>
Description
Example
Input: (Enter value)
AT+MAPN=myapn.isp.com <enter>
Response:
OK
Input: (Retrieve value)
AT+MAPN?<enter>
Response:
+MAPN: myapn.isp.com
OK
The AT&W command
must be issued to save
changes!