© Microhard Systems Inc. 213
Appendix H: “system.conf” File Structure (17 of 25)
#Interval(s): A - Off B - On
AGCR_Timer_trigger=AAAA
#Interval(s):
AGCR_Timer0=0
#Interval(s):
AGCR_Timer1=0
#Interval(s):
AGCR_Timer2=0
#Interval(s):
AGCR_Timer3=0
#Distance trigger(meters): A - Off B - On
AGCR_Distance_trigger=AAAA
AGCR_Distance0=0
AGCR_Distance1=0
AGCR_Distance2=0
AGCR_Distance3=0
#Trigger condition: A - None B - AND C - OR
AGCR_Trigger_condition=AAAA
#Message#1: A - None B - ALL C - GGA D - GSA E - GSV
# F - RMC G - VTG
AGCR_Message_type0=AAAA
#Message#2:
AGCR_Message_type1=AAAA
#Message#3:
AGCR_Message_type2=AAAA
#Message#4:
AGCR_Message_type3=AAAA
#Report# A - Disable B - Modem_Event C - SDP_Event
Event_Remote_Reporting_Status=AAAA
#Remote IP:
Event_Remote_IP_address0=0.0.0.0
#Remote IP:
Event_Remote_IP_address1=0.0.0.0
#Remote IP:
Event_Remote_IP_address2=0.0.0.0
#Remote IP:
Event_Remote_IP_address3=0.0.0.0
#Remote Port:
Event_Remote_PORT0=0
#Remote Port:
Event_Remote_PORT1=0
#Remote Port:
Event_Remote_PORT2=0
#Remote Port:
Event_Remote_PORT3=0
To Next Page
Loading...
