Microhard Systems IPN3G - Page 226

© Microhard Systems Inc. 226
Appendix I: SNMP MIB IPn3G “Sample” (Page 5 of 15)
NetWork_SNMP_V3_Privacy_Password OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "SNMP V3 Privacy Passord."
::= { SNMPConfig 8 }
NetWork_SNMP_Trap_Version OBJECT-TYPE
SYNTAX INTEGER {V1Traps(0),V2Traps(1),V3Traps(2),V1&V2Traps(3),V1&V2&V3Traps(4)}
ACCESS read-write
STATUS mandatory
DESCRIPTION "SNMP Trap Version: 0 - V1 Traps 1 - V2 Traps 2 - V3 Traps
3 - V1&V2 Traps 4 - V1&V2&V3 Traps."
::= { SNMPConfig 9 }
NetWork_SNMP_Auth_Traps_Status OBJECT-TYPE
SYNTAX INTEGER {Disable(0),Enable(1)}
ACCESS read-write
STATUS mandatory
DESCRIPTION "SNMP Authentication Traps Status: 0 - Disable 1 - Enable."
::= { SNMPConfig 10 }
NetWork_SNMP_Trap_Community_Name OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "SNMP Trap Community Name."
::= { SNMPConfig 11 }
NetWork_SNMP_Trap_Manage_Host OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "SNMP Manage Host."
::= { SNMPConfig 12 }
NetWork_SNMP_Config_ACTION OBJECT-TYPE
SYNTAX INTEGER {
SubmitOrReset(0),
Submit(1),
Reset(2),
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "0-Default no selection.1-Submit,this will update setting immidiately.
2-Reset,this will cacel all related settings in the sub tree"
::= { SNMPConfig 13 }
-- Carrier parameter group
Carrier_NAT_Status OBJECT-TYPE
SYNTAX INTEGER {
Disable(0),
Enable(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "NAT Mode: 0 - Disable 1- Enable."
::= { CarrierConfig 1 }