Microhard Systems IPN3G - Page 227

© Microhard Systems Inc. 227
Appendix I: SNMP MIB IPn3G “Sample” (Page 6 of 15)
Carrier_PPP_Status OBJECT-TYPE
SYNTAX INTEGER {
Disable(0),
Enable(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Status: 0 - Disable 1- Enable."
::= { CarrierConfig 2 }
Carrier_IP_Passthrough OBJECT-TYPE
SYNTAX INTEGER {
Disable(0),
Ethernet(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier IP Passthrough"
::= { CarrierConfig 3 }
Carrier_Dial_On_Command_Status OBJECT-TYPE
SYNTAX INTEGER {
Disable(0),
Enable(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Dial On Command Status: 0 - Disable 1- Enable."
::= { CarrierConfig 4 }
Carrier_Idle_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Idle Timeout"
::= { CarrierConfig 5 }
Carrier_Connect_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Connect Timeout"
::= { CarrierConfig 6 }
Carrier_DIAL_MAX_RETRY OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier DIAL MAX RETRY"
::= { CarrierConfig 7 }
Carrier_AUTH_TYPE OBJECT-TYPE
SYNTAX INTEGER {
Disable(0),
Enable(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier AUTH TYPE: 0 - NoAuth 1- pap 2-chap 3 pap-chap"
::= { CarrierConfig 8 }