Microhard Systems IPN3G - Page 231

© Microhard Systems Inc. 231
Appendix I: SNMP MIB IPn3G “Sample” (Page 10 of 15)
Carrier_Wakeup_Oncall_INITSTR1 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Wakeup Oncall INITSTR1"
::= { Carrier_Wakeup_Oncall_Config 4 }
Carrier_Wakeup_Oncall_INITSTR2 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Wakeup Oncall INITSTR2"
::= { Carrier_Wakeup_Oncall_Config 5 }
Carrier_Wakeup_Oncall_INITSTR3 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Wakeup Oncall INITSTR3"
::= { Carrier_Wakeup_Oncall_Config 6 }
Carrier_Wakeup_Oncall_INITSTR4 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Wakeup Oncall INITSTR4"
::= { Carrier_Wakeup_Oncall_Config 7 }
Carrier_Wakeup_Oncall_CALLER_ID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Wakeup Oncall INITSTR4"
::= { Carrier_Wakeup_Oncall_Config 8 }
Carrier_Wakeup_Oncall_CALLER_ACK OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier Wakeup Oncall INITSTR4"
::= { Carrier_Wakeup_Oncall_Config 9 }
Carrier_PowerOn__Config OBJECT IDENTIFIER ::= { CarrierConfig 28 }
-- Carrier_PowerOn__Config parameter group
Carrier_PowerOn_InitStr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Carrier PowerOn InitStr"
::= { Carrier_PowerOn__Config 1 }
Carrier_Config_ACTION OBJECT-TYPE
SYNTAX INTEGER {
SubmitOrReset(0),
Submit(1),
Reset(2),
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "0-Default no selection.1-Submit,this will update setting immidiately.
2-Reset,this will cacel all related settings in the sub tree"
::= { CarrierConfig 30 }