Microhard Systems IPN3G - Page 236

© Microhard Systems Inc. 236
Appendix I: SNMP MIB IPn3G “Sample” (Page 15 of 15)
COM1_UDP_PtoP_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as UDP Point to Point Connection Timeout."
::= { COM1AsUDPPointToPointConfig 4 }
COM1AsUDPPointToMultiPointasPointConfig OBJECT IDENTIFIER ::= { COM1Config 18 }
-- COM1UDPPointToMultiPointasPointConfig Command group
COM1_UM_P_Multicast_Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Multicast Addresss."
::= { COM1AsUDPPointToMultiPointasPointConfig 1 }
COM1_UM_P_Multicast_Port OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Multicast Port."
::= { COM1AsUDPPointToMultiPointasPointConfig 2 }
COM1_UM_P_Listen_Port OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Local Listen Port."
::= { COM1AsUDPPointToMultiPointasPointConfig 3 }
COM1_UM_P_TTL OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Multicast TTL Value."
::= { COM1AsUDPPointToMultiPointasPointConfig 4 }
COM1AsUDPPointToMultiPointasMultiPointConfig OBJECT IDENTIFIER ::= { COM1Config 19 }
-- COM1UDPPointToMultiPointasMultiPointConfig Command group
COM1_UM_M_Remote_Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Remote IP Addresss."
::= { COM1AsUDPPointToMultiPointasMultiPointConfig 1 }
COM1_UM_M_Remote_Port OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Remote Port."
::= { COM1AsUDPPointToMultiPointasMultiPointConfig 2 }
COM1_UM_M_Multicast_Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Multicast Address."
::= { COM1AsUDPPointToMultiPointasMultiPointConfig 3 }