Microhard Systems IPN3G - Page 235

© Microhard Systems Inc. 235
Appendix I: SNMP MIB IPn3G “Sample” (Page 14 of 15)
COM1_TCP_COrS_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Client Connection Timeout."
::= { COM1AsTCPClientOrServerConfig 3 }
COM1_TCP_COrS_Server_Mode OBJECT-TYPE
SYNTAX INTEGER {
Monitor(0),
Multi-polling(1),
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Server, polling mode, Monitor or Multi-polling "
::= { COM1AsTCPClientOrServerConfig 4 }
COM1_TCP_COrS_Server_Polling_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Server,Multi-polling Timeout(ms)."
::= { COM1AsTCPClientOrServerConfig 5 }
COM1_TCP_COrS_Local_Listen_Port OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Local as Server Listen Port."
::= { COM1AsTCPClientOrServerConfig 6 }
COM1_TCP_COrS_Local_Server_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Server Remote Client Connection Timeout."
::= { COM1AsTCPClientOrServerConfig 7 }
COM1AsUDPPointToPointConfig OBJECT IDENTIFIER ::= { COM1Config 17 }
-- COM1UDPPointToPointConfig Command group
COM1_UDP_PtoP_Remote_Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as UDP Point to Point Remote Ip Addresss."
::= { COM1AsUDPPointToPointConfig 1 }
COM1_UDP_PtoP_Remote_Port OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as UDP Point to Point Remote Server Listen Port."
::= { COM1AsUDPPointToPointConfig 2 }
COM1_UDP_PtoP_Listen_Port OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as UDP Point to Point Connection Local Listen Port."
::= { COM1AsUDPPointToPointConfig 3 }