Microhard Systems IPN3G - Page 234

© Microhard Systems Inc. 234
Appendix I: SNMP MIB IPn3G “Sample” (Page 13 of 15)
COM1_TCP_Client_Server_Port OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Client Remote Server Listen Port."
::= { COM1AsTCPClientConfig 2 }
COM1_TCP_Client_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Client Connection Timeout."
::= { COM1AsTCPClientConfig 3 }
COM1AsTCPServerConfig OBJECT IDENTIFIER ::= { COM1Config 15 }
-- COM1TCPServerConfig Command group
COM1_TCP_Server_Mode OBJECT-TYPE
SYNTAX INTEGER {
Monitor(0),
Multi-polling(1),
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Server, polling mode, Monitor or Multi-polling "
::= { COM1AsTCPServerConfig 1 }
COM1_TCP_Server_Polling_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Server,Multi-polling Timeout(ms)."
::= { COM1AsTCPServerConfig 2 }
COM1_TCP_Server_Listen_Port OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Local as Server Listen Port."
::= { COM1AsTCPServerConfig 3 }
COM1_TCP_Server_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Server Remote Client Connection Timeout."
::= { COM1AsTCPServerConfig 4 }
COM1AsTCPClientOrServerConfig OBJECT IDENTIFIER ::= { COM1Config 16}
-- COM1TCPClientOrServerConfig Command group
COM1_TCP_COrS_Remote_Server_Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Client Remote Server Ip Addresss."
::= { COM1AsTCPClientOrServerConfig 1 }
COM1_TCP_COrS_Remote_Server_Port OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Client Remote Server Listen Port."
::= { COM1AsTCPClientOrServerConfig 2 }