Microhard Systems IPN3G - Page 233

© Microhard Systems Inc. 233
Appendix I: SNMP MIB IPn3G “Sample” (Page 12 of 15)
COM1_Character_Timeout OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 Character Timeout."
::= { COM1Config 9 }
COM1_Maximum_Packet_Size OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 Maxmum Packet Size."
::= { COM1Config 10 }
COM1_Priority OBJECT-TYPE
SYNTAX INTEGER {
Normal(0),
Medium(1),
High(2),
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 Data Format: 0 - Normal 1 - Medium 2 - High "
::= { COM1Config 11 }
COM1_No_Connection_Data_Intake OBJECT-TYPE
SYNTAX INTEGER {
Disable(0),
Enable(1),
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 No Connection Data Intake: 0 - Disable 1 - Enable "
::= { COM1Config 12 }
COM1_IP_Protocol OBJECT-TYPE
SYNTAX INTEGER {TCPClient(0), TCPServer(1), TCPClient/Server(2),UDPPointtoPoint
(3),
UDPPointtoMultiPoint_as_point(4),UDPPointtoMultiPoint_as_Multipoint(5),
UDPMultiPoint_to_Multipoint(6),smtp(7)}
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 IP Protocol: 0 - TCP Client 1 - TCP Server 2 - TCP Client/Server
3 - UDP Point to Point 4 - UDP Point to MultiPoint(as point)
5 - UDP Point to MultiPoint(as Multipoint).6-UDP MultiPoint to Multipoint
7 - smtp"
::= { COM1Config 13 }
COM1AsTCPClientConfig OBJECT IDENTIFIER ::= { COM1Config 14}
-- COM1TCPClientConfig Command group
COM1_TCP_Client_Server_Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "COM1 as TCP Client Remote Server Ip Addresss."
::= { COM1AsTCPClientConfig 1 }