© Microhard Systems Inc. 49
4.0 WebUI Configuration
HostName
A user can set up a reachable host (IP or domain) for the unit to ping
periodically to keep the WAN connection alive (Wireless Carrier) in case
the carrier shuts it down due to lack of activity. PING frequency is defined
by the Interval.
IP Address or Name of host
for ICMP PING.
Values (IP Address)
Interval
The Interval value determines the frequency, or how often, the IPn3G will
send out PING messages to the Host.
30
Values (seconds)
Count
The Count field is the maximum number of PING errors such as “Host
unreachable” the IPn3G will attempt before the unit will reboot itself to
attempt to correct connection issues. If set to zero (0), the unit will never
reboot itself.
10
Values
ICMP Keep Alive Check
This selection allows the use of a ICMP Keep Alive Check for the IPn3G.
The default is disabled.
Disable / Enable
Values (selection)
Image 4-22: Carrier Configuration Menu, ICMP Keep Alive Check...
To Next Page
Loading...
