© Microhard Systems Inc. 84
4.0 WebUI Configuration
Local Setup > Gateway IP Address
Displays the current WAN IP address of the IPn3G.
Values (IP Address)
Current WAN IP Address
Local Setup > Subnet IP Address
Define the local network by specifying the local subnet. Each end of the
tunnel must be on different subnets. To setup/change the local subnet on
the IPn3G, visit the Network Configuration Tab prior to setting up a VPN
tunnel.
Values (IP Address)
(no default)
Local Setup > Subnet Mask
Specify the subnet mask of the local network address.
Values (IP Address)
(no default)
IP Only: Choose this option if this router has a static WAN IP address. The WAN IP address appears
automatically. For the Remote Security Gateway Type, an extra field appears. If you know the IP address
of the remote VPN router, choose IP Address, and then enter the address.
IP + Server ID: Choose this option if this router has a static WAN IP address and a server id. The WAN IP
address appears automatically. For the Remote Security Gateway Type, an extra field appears. If you
know the IP address of the remote VPN router, choose IP Address, and then enter the address.
Dynamic IP + Server ID: Choose this option if this router has a dynamic IP address and a server id
(available such as @microhard.vpn). Enter the server id to use for authentication. The server id can be
used only for one tunnel connection.
Local Setup > Local Server ID
This option appears when the Local Security Gateway Type specifies that
the Server ID is required for the connection. The Server ID must be in the
format @name, where name can be anything. Both routers must know
each others names to establish a connection.
Values (characters)
(no default)
Local Setup > Certificate
If X.509 CA Authentication is selected, this field will appear. Enter
the certificate to be used by the current tunnel.
Values (IP Address)
(no default)
Local Setup > Private Key
If X.509 CA Authentication is selected, this field will appear. Enter
the Private Key required by the X.509 protocol.
Values (IP Address)
(no default)
To Next Page
Loading...
