© Microhard Systems Inc. 96
4.0 WebUI Configuration
Remote Setup > Subnet IP Address
Specify the LAN subnet being used on the remote network. This must be a
different subnet than on the local router.
Values (IP Address)
0.0.0.0
Remote Setup > Subnet Mask
Specify the LAN subnet mask being used on the remote network.
Values (IP Address)
0.0.0.0
Image 4-57: GRE > IPsec Setup
The setup for GRE IPsec is identical to the setup of VPN IPsec, refer to the previous section for
more information.
To Next Page
Loading...
