TriStar II 3020 Installing the Software
302-42828-01 - Dec 2012 4-7
10. The Calibration File Installation screen displays.
Calibration files are located on a separate calibration CD. Replace the setup CD with the
calibration CD and browse to the calib directory.
To prevent the CD from AutoPlay, press and hold down the Shift key before closing the CD door.
Do not release the Shift key until the CD light stops blinking.
Click Next.
11. The Analyzer S/N [n] Installed screen displays. Click Next. A screen displays for each unit
installed.
To Next Page
Loading...
