Need help?Do you have a question about the Microplex LOGIJET T4 and is the answer not in the manual?
Overview of LOGIJET T4/T6 printers, features, resolution, and speed.
Details on the integrated RF Write/Read module for RFID label processing.
Explanation of thermal transfer and thermal direct printing technologies.
Symbols and conventions used in the manual for clarity and ease of understanding.
Declaration of compliance with EU guidelines for information technology devices.
Essential safety guidelines for operating the printer and avoiding interference.
Step-by-step instructions for safely unpacking the printer from its shipping box.
Procedures for verifying all printer components and accessories are included and undamaged.
Guidelines for selecting a suitable location and environmental conditions for printer setup.
Identification and description of the main printer parts and their functions.
A flowchart illustrating the general sequence of operations for printer setup and use.
Illustration showing material and ribbon winding directions within the printer.
Instructions for loading and managing roll-fed media for tear-off or external processing.
Procedures for loading, tension adjustment, and removal of thermal transfer ribbons.
Guidance on adjusting printhead pressure for optimal print quality and preventing wear.
Steps for connecting the printer to a computer or network using appropriate interface lines.
Instructions for powering up the printer, including safety precautions and initial status.
Diagram identifying the key elements of the printer's control panel, including LEDs, display, and keys.
Detailed explanation of the display and control panel keys' functions and designations.
How to change printer settings using the control panel and the implications of temporary/permanent changes.
Overview of the printer's menu hierarchy and navigation access via the control panel.
Explanation of diagrammatic conventions used to describe control panel functions and key sequences.
Function to select between thermal direct and thermal transfer printing modes.
Adjusting printer settings for different material types like labels or continuous media.
How to set the correct page length for the installed media, including manual measurement.
Procedure to initiate the printer's automatic measurement of label length.
Enabling/disabling automatic label length measurement upon printer power-on or printhead closure.
Setting the printer's format width to match the actual paper width for optimal printing.
Adjusting the left and right text margins, expressed in dots, for print layout.
Generating a status sheet containing printer configuration and available fonts.
Listing all installed fonts, including demo prints and PCL selection commands.
Activating Hexdump mode for raw interface data analysis and error diagnosis.
Resuming normal printing or performing a form feed after Hexdump mode.
Function to clear the input buffer and resume print jobs after interruptions.
Printing a survey of all available panel functions and menu structure.
Creating test prints without sending data for error analysis.
Setting interface parameters like timeout for data transfer between printer and host.
Changing the active emulation mode (e.g., HP PCL 5) for printer compatibility.
Setting the language for display messages, status sheets, and font lists.
Configuring a transparent code to initiate IDOL commands via printable characters.
Allocating RAM between input buffer and macro/download memory.
Resetting all printer configurations to their original factory default settings.
Selecting the active font from the list of available fonts installed on the printer.
Setting the text orientation for printing, e.g., portrait or landscape.
Selecting the active symbol code for character representation during printing.
Adjusting the print speed (2-6 inch/s) to optimize contrast and adapt to materials.
Adjusting print density (contrast) of characters, ranging from 10% to 120%.
Shifting the print image horizontally (crosswise to print direction) by adjusting X-position.
Shifting the print image vertically (along the print direction) by adjusting Y-position.
Choosing between Gap Sensor (punched labels) and Reflex Sensor (marked materials).
Adjusting the printer's Sync Sensor to the material in use for accurate detection.
Manually adjusting Sync sensor level for materials with high contrast proof points.
Adjusting printer configuration after installing or deinstalling peripheral devices.
Adjusting material transport for tear-off or cutting modes for label processing.
Defining label output and print behavior, including Real 1:1 and Normal 1:1 modes.
Fine-tuning the tear-off position offset for accurate label separation.
Setting network parameters like IP address for connecting the printer to a network.
Description of the integrated module for programming and reading RFID tags.
Overview of panel functions related to RFID operations.
Enabling or disabling the RFID mode for label processing.
Choosing the communication protocol for RF Write/Read module and transponder.
Setting the transponder position for optimal RFID read/write performance.
Setting the maximum number of allowed unsuccessful RFID accesses before a label is deemed defective.
Configuring the data transfer speed between the RF module and the transponder.
Enabling automatic reading of RFID label IDs during printing and sending them to the host.
How the printer sends RFID data and status information to the host via data and status channels.
Explanation of IDOL commands for interacting with RFID tags.
Format and structure of RFID data and status messages sent by the printer.
Information on common RFID errors and their explanations or remedies.
General guidelines and safety precautions for performing printer cleaning operations.
Procedures and precautions for exchanging the printer's printhead, performed by trained operators.
Adjusting printhead pressure to compensate for media variations and ensure optimal transfer.
List of common printer error messages displayed on the control panel and their remedies.
Troubleshooting steps for common print quality issues like printouts being too light or too strong.
Diagnosing and resolving issues related to incorrect media feeding or paper jams.
Error messages and remedies for optional printer peripherals like rewinders, dispensers, and cutters.
Explanation of the automatic jam safety function that repeats pages after an error.
Definition of consumables and factors affecting their utilization time, like print density.
Parts requiring exchange by service personnel based on usage criteria.
Information on spare parts that are exchanged by service engineers when they fail.
How to configure the status channel for receiving printer status and job information.
List and explanation of status messages related to print job processing.
List and explanation of various printer status messages indicating operational states or errors.
General| Brand | Microplex |
|---|---|
| Model | LOGIJET T4 |
| Category | Label Maker |
| Language | English |
To Next Page