Microplex LOGIJET T4 - CE - Conformity; General Safety Regulations

Introduction 11
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual LOGIJET T4 /T6 /RFID Edition 1.3
1.5. CE - Conformity
The manufacturer hereby declares that the device complies with
the guideline RL 89/336/EWG for information technology
devices.
The determinations of the product standard concerning high
frequency interferences of information technology devices EN
55022, class A/DIN VDE 0878 (electromagnetic interference)
are complied.
Also the generic standard EN 50082-1/DIN VDE 0839 for
interference strength is complied.
The LOGIJET T4 RFID and LOGIJET T6 RFID printers incorporate
an integrated compact reader (RF Write/Read module).
The Declaration of Conformity can be found in section
8.1 Integrated RF Write/Read module.
1.6. General Safety Regulations
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Incorrect operation of this equipment in a
residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his
own expense.