Microplex LOGIJET T4 - Clearing the Input Buffer (Cancel Job)

Panel Functions 69
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual LOGIJET T4 /T6 /RFID Edition 1.3
7.10. Clearing the Input Buffer (Cancel Job)
This function permits the resumption of a print job at a particular
page after a print interruption (e.g. paper jam). The data
contained in the input buffer before the interruption are cleared.
OFFL.
MENU
ENTER
NEXT
ENTER
ENTER
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
[Status Sheet ]
& & &
[Cancel Job ]
[Cancel Job ]
Notes
Turn the printer OFF LINE with this
key.
The MENU key gives the user access
to the menu structure.
Menu level 1 is selected.
Press the NEXT or PREVIOUS key
until [Cancel Job ] is displayed.
All data contained in the input buffer
will be cleared.
Turn the printer ON LINE again:
Press the ENTER key longer than 2
seconds.