Microplex LOGIJET T4 - Print Repetition after an Error

Troubleshooting 157
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual LOGIJET T4 /T6 /RFID Edition 1.3
10.5. Print Repetition after an Error
The printer is provided with an automatic jam safety
function to prevent a loss of data.
When an error occurs, all the pages on the paper path
will be printed again. This ensures that no data will get
lost.
The exact number of pages to repeat depends on the
format length and the position where the error occurred
on the page.
This automatic jam safety function can be switched off (by
changing the EEPROM - configuration) if the user wants to
resume the print job at a position he chooses himself.
In addition to this see panel function Clearing the Input
Buffer (section 7.10).