Panel Functions 107
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual LOGIJET T4 /T6 /RFID Edition 1.3
Notes:
If your network is using DHCP
"
, an address can be automatically
assigned (select the item DHCP from the network submenu IP
Assign).
The parameters Subnet Mask and Gateway are configured in
the same way as described above. Please select the concerning
panel functions for this (compare section 6.6 Menu Structure).
Select the subitem Off from the network menu to switch off the
network access.
"
Dynamic Host Configuration Protocol: offers among other things
a centralized address management.
To Next Page
Loading...