Microplex LOGIJET T4 - Page 22

22 Basic Operation Sequences
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual LOGIJET T4 /T6 /RFID Edition 1.3
!
If the panel settings above shall be effective permanently (that
means they do not have to be put in again after a printer
OFF/ON) the setting values can be saved permanently by
operating the ENTER key two times.
An output of the current setting values can be generated using the
"Printing the Status Sheet“ panel function (see section 7.6).
Detailed information on the operations above and to further
functions of the printer LOGIJET T4 /T6 /RFID can be found in the
following chapters.