Microtest OMNIScanner2 User Manual

12 - 5
OMNIScanner User Guide
9. The message ‘Download complete’ will be displayed to inform you when
the Configuration is downloaded. Click OK to return to the main screen.
The new Configuration is now implemented, and OMNI Scanner2 displays
the Project screen. (Consult the OMNIScanner Configuration on-line help
for further information.)
Remote Controlling OMNIScanner2
1. To remote control OMNI Scanner2 , first turn your PC on.
2. Connect OMNIS canner2 and OMNI Remote via the link to be tested.
3. Use the USB Cable to connect OMNI Scanner2 to the PC and then turn
on OMNI Scanner2 .
4. Run the OMNI Scanner Remote Control software.
5. Select Setup | Communication Port and select USB as the Port.
6. Click the (Connect) button.
As soon as the connection occurs, the OMNI Scanner ’s serial number will
be displayed.
OMNI Scanner Remote Control will detect the Adapter that is currently
attached to OMNI Scanner 2 and display the name of the adapter. If an
OMNIFiber adapter is attached the serial number will be displayed.
The Remote Control program will read OMNI Scanner ’s Configuration
(Projects, Autotest, and cables).
Once the connection is completed the Connection Status bar displays
Ready!. (Consult the OMNIScanner Remote Control on-line help for further
information.)
Note: OMNIScanner Remote Control software can be connected to
several OMNIScanner2s, but only one at a time can be remote controlled.
If you have more than one scanner connected, the USB Connection List
will appear and allow you to select the scanner you wish to remote control.
The OMNIScanner2s are listed by serial number. Select a scanner and
click OK to continue.

Microtest OMNIScanner2 Specifications

General

Brand	Microtest
Model	OMNIScanner2
Category	Scanner
Language	English