OMNIScanner User Guide
4 - 14
Fiber Adapter Info
Select Fiber Info to display the FIBER INFO screen.
The Serial numbers and the date the adapters were
last factory calibrated is displayed.
The currently used reference method(s) are dis-
played on the bottom of the screen.
Press ESC to return to the SETUP screen.
Format MMC
OMNIScanner2 only: When using the
MultiMediaCard for the first time, it may require
formatting.
Insert the MMC into OMNIScanner2’s MMC slot.
Select Format MMC to open the FORMAT MMC
screen. Formatting will start immediately.
The formatting time is dependent on the capacity of
the MultiMediaCard, 8MB will require 2 minutes.
Regional Settings
Select Regional Settings to open the REGIONAL screen. The settings
affect the way OMNI
Scanner
displays dates and numbers.
The REGIONAL screen displays the Language
that is currently selected. To change the language,
press ENTER and use the éê keys to highlight a
language. Press ENTER once more to select it as
the default language.
Use the è to advance to the Units: field. Press
ENTER to switch the units from Meters to Feet.
Use the éê keys to highlight the desired measure-
ment unit and press ENTER to select it as the
default measurement.
To Next Page
Loading...
Need help?
General
