Microtest OMNIScanner2 User Manual

OMNIScanner User Guide
1 - 2
OMNIFiber
TM
OMNI Fiber transforms OMNI Scanner and OMNIScanner2 into a fiber optic
tool for testing and certification of multimode and single-mode fiber
premise networks. OMNI Fiber consists of two test heads that attach directly
onto OMNI Scanner and OMNI Remote to become a part of each unit. Using
the 1-Button Autotest feature, OMNI Fiber measures loss and length over
two fibers simultaneously. The measurements are compared against the
selected LAN standard for instant PASS/FAIL analysis. OMNI Fiber mea-
sures loss at 850 and 1300 nm over multimode fiber and at 1310 and 1550
nm over single-mode fiber.
Up to 1000 Autotests can be saved to nonvolatile memory. Saved results
can be easily uploaded to the PC with Scanlink
TM
software.
Scanlink
TM
Tools Software
PC-based software expands OMNI Scanner’s user interface and aids with
the management of projects. Scanlink Tools consist of the OMNIScanner
Configuration software, the Scanlink Upload software, and the OMNI-
Scanner Remote Control software. These programs allow you to store,
retrieve, manage, edit and print network cabling information. Scanlink Tools
provide the ability to create professional reports, remote control OMNI-
Scanner , and define cable and project configurations that can be down-
loaded to OMNI Scanner .

Microtest OMNIScanner2 Specifications

General

Brand	Microtest
Model	OMNIScanner2
Category	Scanner
Language	English