Miller LiveArc - Serial Number and Rating Label Location; Software Licensing Agreement; Specifications

To Next Page

To Previous Page

OM-267357 Page 8

4-2. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the side of monitor frame. Use rating label to determine input power requirements

and/or rated output, and to register for free software upgrades. For future reference, write serial number in space provided on back cover of this manual.

4-3. Software Licensing Agreement

The End User License Agreement and any third-party notices and terms and conditions pertaining to third-party software can be found at

https://www

.millerwelds.com/eula

and are incorporated by reference herein.

4-4. Information About Default Weld Parameters And Settings

NOTICE − Each welding application is unique. Although certain Miller Electric products are designed to determine and default to certain typical welding

parameters and settings based upon specific and relatively limited application variables input by the end user, such default settings are for reference

purposes only; and final weld results can be affected by other variables and application-specific circumstances. The appropriateness of all parameters

and settings should be evaluated and modified by the end user as necessary based upon application-specific requirements. The end user is solely

responsible for selection and coordination of appropriate equipment, adoption or adjustment of default weld parameters and settings, and ultimate

quality and durability of all resultant welds. Miller Electric expressly disclaims any and all implied warranties including any implied warranty of fitness

for a particular purpose.

4-5. Specifications

Monitor And Welding Table

Dimensions Unit With Positioning Arm: 45.5 x 31 x 81.5 in. (116 x 79 x 207 cm)

Unit With Optional Stick Upgrade Module: 45.5 x 32.75 x 81.5 in. (116 x 83 x 207 cm)

Weight Base Unit: 480 lb (218 kg)

Unit With Optional Stick Upgrade Module: 506 lb (230 kg)

Input Power 120 Volts AC, 15 Amps, 60 Hz

Operating Conditions:

Maximum Relative Humidity 80% For Temperatures Up To 88°F (31°C) And Decreasing Linearly To 50% At 104°F (40°C)

Training System Operating Modes GMAW/FCAW: Simulated (SIM) And Live Arc (WELD)

SMAW: SETUP And Live Arc (WELD)