OM-267357 Page 17
H
! Keep fingers away from pinch
points on positioning arm.
1 Work Clamp
2 Connection Plate For Weld
Table Work Clamp
3 Work Clamp Connection On
Clamp Assembly
Work clamp plates are located
on both sides of weld table.
Connect work clamp from welding
power source to connection plate on
weld table.
When using positioning arm to per-
form out-of-position welds, connect
additional work cable from weld ta-
ble to round bar through extension
arm.
5-8. Installing Power Source Work Clamp
Connect to welding power
source work terminal.
3
Connect additional
work cable from weld
table to surface on
clamp assembly.
Ref. 268609-C
Connect clamp
to surface.
1
2
To Next Page
Loading...
