OM-267357 Page 60
Trouble Remedy
Cameras do not track clamp.
Ensure clamp is positioned/oriented properly.
Ensure clamp is within specified height range for the specific joint type.
Ensure coupon is not interfering with camera’s view of clamp markers.
Clean debris off clamp marker covers.
Replace clamp marker covers.
Clean/replace camera cover.
Recalibrate clamp (see Section 8-9).
Redo Camera-to-Arms Linkage Adjustment (see Section 8-8).
SmartGun displays “Connection not
established.”
High frequency interferes with SmartGun function. Do not connect LiveArc to a circuit used by equip-
ment producing high frequency. Do not connect work cable to a common ground used by welding
equipment producing high frequency.
Connection issue with SmartGun,
SmartStinger
, or Router Box.
Ensure all data cables are fully threaded into the connector.
Notes
To Next Page
Loading...
