MIMAKI JFX200-2513EX - Page 103

Chapter 3 Convenient Usage
3-35
6
Press to select the setting item and press the [ENTER] key.
• Available settings: LENGTH/FILE
• LENGTH:
The nozzle is checked once a certain set length has been printed.
• FILE:
The nozzle is checked once a certain number of files have been printed.
SETUP
FILE
=
7
Press to select the setting value and press the [ENTER] key.
• LENGTH: 0.1 to 50.0
• FILE: 1 to 100
INTERVAL
30
=
8
Press to select [CONTINUATION PRINT], and press the [ENTER] key.
• The [CONTINUATION PRINT] setting screen is displayed.
Printing Check
：CONTINUATION PRINT
9
Press to select "ON" or "OFF", and press the [ENTER] key.
• Available settings: ON/OFF
CONTINUATION PRINT
=
ON
10
Press to select "ACTION" and press the [ENTER] key.
Printing Check
: ACTION
11
Press to select the setting value and press the [ENTER] key.
• Available settings: NORMAL/HARD/SOFT
CLEANING
=
SOFT
12
Press to select the setting value and press the [ENTER] key.
• Available settings: 0 to 3
RETRY COUNT
=
1
13
Press the [END] key to end the operation.
3