Chapter 3 Convenient Usage
3-25
Machine Settings
These are various settings to help you use this machine comfortably.
The following settings can be configured for the machine.
Item Set value Details
AUTO Power-off
"AUTO Power-off Settings" (P. 3-25)
NONE/10 to 30
to 600 min
If are no operations or a set time, the power
turns off automatically.
TIME
"Time Settings" (P. 3-26)
+4 h to -20 h
(Japan time)
Sets the current date and time.
UNIT
"Unit
Settings" (P. 3-27)
TEMP. °C (Celsius)/°F
(Fahrenheit)
Sets the display unit for temperature.
LENGTH mm/inch Sets the display units for length and area.
KEY BUZZER
"Key Buzzer Settings" (P. 3-28)
ON/OFF Sets the buzzer sound for when a key is
pressed.
LANGUAGE
"Language Settings" (P. 3-29)
English
ニホンゴ
Deutsch
Français
Español
Italiano
Português
Changes the display language.
NETWORK
"Network
Settings" (P. 3-29)
Configures the network.
Check IP ADDRESS Displays the IP address the machine is currently using.
Check MAC ADDRESS Displays the MAC address the machine is currently using.
DHCP ON/OFF If set to "ON", an IP address received from
the DHCP server is used.
AutoIP ON/OFF If set to "ON", the IP address to be used is
set according to the AutoIP protocol.
However, if DHCP is ON, DHCP takes
priority.
IP ADDRESS
*1
Set the IP address used by this machine.
DEFAULT GATEWAY
*1
Sets the default gateway to be used.
DNS ADDRESS
*1
Sets the DNS address used by this machine.
SUB NET MASK
*1
Sets the sub net mask to be used.
External Stop I/F
"External Stop I/F" (P. 3-31)
ON/OFF If you change the External Stop I/F in
REMOTE mode, a warning is displayed,
and the machine will switch to LOCAL
mode.
RESET
"Resetting to Default Settings" (P. 3-38)
- Returns all setting items to default values.
*1. Settable only when [DHCP] and [AutoIP] are both off
AUTO Power-off Settings
If are no operations or a set time, the power turns off automatically.
1
Press the [FUNCTION] key in LOCAL.
3
To Next Page
Loading...
