MIMAKI JFX200-2513EX - AUTO CLEANING Settings

Chapter 3 Convenient Usage
3-21
AUTO CLEANING Settings
You can set this function so that it counts the number of printed files or printed length after printing is
complete, performs cleaning automatically if required.
The machine can deliver stable output if its heads are always kept clean.
1
Press the [FUNCTION] key in LOCAL.
FUNCTION
[ENT]
VIEW
2
Press to select [SETUP].
FUNCTION
[ENT]
SETUP
3
Press the [ENTER] key.
SETUP
[ENT]
DROP.POScorrect
4
Press to select [AUTO CLEANING].
SETUP
[ENT]
AUTO CLEANING
5
Press the [ENTER] key.
AUTO CLEANING
: OFF
6
Press to select [AUTO CLEANING] type.
• When you select "PAGE" in [AUTO CLEANING], head cleaning is automatically performed once
the set number of prints is complete.
• If you do not want to set [AUTO CLEANING], select "OFF" and proceed to Step 11.
AUTO CLEANING
: PAGE
7
Press the [ENTER] key.
8
Press to select cleaning interval.
• Available settings: 1 to 1000 pages
INTERVAL
1 page
=
9
Press the [ENTER] key.
TYPE
: SOFT
3