MIMAKI JFX200-2513EX - WORK CHANGE Settings

Chapter 3 Convenient Usage
3-19
WORK CHANGE Settings
Set whether to return to LOCAL mode or keep the REMOTE mode after online plotting is complete.
1
Press the [FUNCTION] key in LOCAL.
FUNCTION
[ENT]
VIEW
2
Press to select [SETUP].
FUNCTION
[ENT]
SETUP
3
Press the [ENTER] key.
SETUP
[ENT]
DROP.POScorrect
4
Press to select [WORK CHANGE].
SETUP
[ENT]
WORK CHANGE
5
Press the [ENTER] key.
WORK CHANGE
: OFF
6
Press to select the value to be set.
• OFF:
REMOTE mode is maintained after online plotting (When the next drawing data is received, it will
be overwritten.)
• ON:
Y-bar is retracted after online plotting and the machine returns to LOCAL mode.
• HOST:
If you specify the "Print Count" to two or more on the RasterLink6 screen, the Y-bar is retracted
after each print is completed and the machine returns to LOCAL mode.
WORK CHANGE
: ON
• The position where the Y-bar is retracted is the position set with "Setting the VIEW
Position" (P. 2-18).
7
Press the [ENTER] key.
SETUP
[ENT]
WORK CHANGE
8
Press the [END] key several times to end the operation.
3