MIMAKI JFX200-2513EX - Media Thickness and Head Gap Configuration

Chapter 3 Convenient Usage
3-4
Registering the Media Thickness
Register the thickness of the media to be set.
You can register the thickness in the following three methods.
• Registering the thickness manually
• Selecting with [UP] [DOWN] keys
• Checking the thickness automatically
Registering the Media Thickness Manually
1
Press the [FUNCTION] key in LOCAL.
FUNCTION
[ENT]
VIEW
2
Press to select the [HEAD HEIGHT].
FUNCTION
[ENT]
HEAD HEIGHT
3
Press the [ENTER] key twice.
2.5mm
MEDIA THICKNESS
4
Press to enter the media thickness (0.0 to 50.0 mm).
10.5mm
MEDIA THICKNESS
5
Press the [ENTER] key.
FUNCTION
[ENT]
HEAD HEIGHT
6
Press the [END] key to end the operation.
Registering the Media Thickness with the [UP] and [DOWN] Keys
1
Press the [UP] key or [DOWN] key.
Z HEIGHT = 45.0
ORIGIN SETUP
2
Press the [UP] key or [DOWN] key to adjust the value of thickness.
Z HEIGHT = 50.0
ORIGIN SETUP