MIMAKI JFX200-2513EX - Consumables Replacement and Waste Ink Disposal

Chapter 4 Maintenance
4-32
Replacement of Consumables
Replacing the wiper
The wiper is a consumable good. If the message on the right is displayed, replace the wiper as soon as
possible.
Also, wipe the ink sticking to the lower surface of the slider.
<LOCAL>
[MNT]
REPLACE WIPER
• Cleaning wipers are sold separately. Purchase one from your local distributor or our sales office.
1
When the message is displayed, press the [ENTER] key.
REPLACE WIPER
[ENT]
EXECUTE
2
Press the [ENTER] key.
• Carriage moves onto the table.
REPLACE WIPER
[ENT]
COMPLETED
• [COMPLETED :ENT] is displayed on the screen until the replacement work is completed.
Press the [ENTER] key after the work up to Step 4 is complete.
3
Remove the wiper
• Pull out the wiper by holding the protrusions at both the ends.
Protrusion